Stainless Steel Pipe Clamp 3 Inch

Name: Stainless Steel Pipe Clamp 3 Inch
SKU: SST-0101

In Stock GULF MEP Ref.: SST-0101 Unit: pcs MOQ: 1

Stainless steel pipe clamp designed to secure compatible 3-inch pipework. Suitable for larger pipe support applications

Availability

Riyadh · Saudi Arabia
Dubai · United Arab Emirates
Doha · Qatar
Kuwait City · Kuwait

Description

Pipe clamp manufactured from stainless steel and designed to provide support for compatible pipe sections when installed using suitable mounting hardware

Applications

Industrial pipework
MEP installations
Pipe support

Specifications

Type	Pipe clamp
Material	Stainless steel
Pipe Size	3 inch

Available on request: Mounting Type, Finish. Tell us the configuration you need and we will confirm these in writing: Get Quote

Choosing and specifying this item

Movement becomes a design item

By three inches, a run of any length is moving enough with temperature that the support layout has to be planned rather than spaced evenly. Decide first where the line is anchored and where it is guided; everything else follows from those two positions. Holding a long heated run rigidly at every point is how pipe bows, fixings work loose and joints end up loaded in a way nobody drew.

Practical points

At this size supports are more often carried on a trapeze or a bracket off structural steel than fixed straight to a wall. Confirm the mounting type and hole centres against the channel or steel you intend to use, so nothing is drilled twice.
Closing a two-piece clamp unevenly grips on one side and lets the pipe creep on the other. Agree a tightening method with the installer rather than leaving it to feel.
Finish and grade should be quoted against exposure. Three inch is frequently the size running across a roof or a yard, which on a coastal site is the hardest duty in the building.

Ask directly

Whether the support is intended as a guide, a hold-down or a load-bearing point — similar-looking parts are detailed very differently.

Compare the rest of the range in Stainless Steel Pipe Clamps, Supports & Accessories, Stainless Steel Pipes & Fittings. Related reading: Elbows, Tees and Reducers: Getting the Fitting Schedule Right.

Frequently asked questions

Do I really need to allow for thermal expansion at three inch?

On any run of length that changes temperature, yes. Stainless expands appreciably with temperature rise, and over a long straight run that adds up to real movement. The support layout is how you control it: fixed anchor points to define where the pipe stays put, guides between them to let it slide, and a loop, offset or expansion device to absorb the growth. Clamping everything solid simply moves the problem into the joints.

Wall fixing or trapeze at this size?

Trapeze or steel bracket is common at three inch, because the load and the fixing spread are usually beyond what a single wall anchor should be asked to do, and because other services often run the same route. Confirm the mounting type and hole centres of the clamp against the channel section you plan to use, so the parts match without site modification.

The line runs outdoors on a roof. What should I confirm?

The grade and the finish, in writing, against that exposure — a coastal roof combines chloride-laden air, high humidity, UV and daily thermal cycling. Also confirm the fixing detail into the roof structure and whether any waterproofing penetration is involved, and specify stainless fasteners throughout so the assembly does not fail at a plated bolt long before the clamp itself is affected.

How tight should the clamp be?

Tight enough for the function you have chosen. An anchor is closed to hold the pipe; a guide is set to locate it while permitting axial movement. Close a two-piece clamp evenly, working the fixings alternately rather than fully tightening one side first, otherwise the grip is one-sided. Agree the method with the installer so it is consistent along the run.