Stainless Steel Pipe Hanger 1 Inch

Name: Stainless Steel Pipe Hanger 1 Inch
SKU: SST-0105

In Stock GULF MEP Ref.: SST-0105 Unit: pcs MOQ: 1

Stainless steel pipe hanger designed to support compatible suspended pipework. Suitable for commercial, industrial and MEP installations

Get Quote WhatsApp

Availability

Riyadh · Saudi Arabia
Dubai · United Arab Emirates
Doha · Qatar
Kuwait City · Kuwait

Description

Pipe hanger used to suspend and support compatible piping from a suitable overhead or structural support arrangement

Applications

Suspended pipework
MEP installations
Industrial piping

Specifications

Type	Pipe hanger
Material	Stainless steel
Pipe Size	1 inch
Mounting Type	Suspended

Available on request: Finish. Tell us the configuration you need and we will confirm these in writing: Get Quote

Choosing and specifying this item

The pipe end is the easy half

Suspension is already settled here, so the real decisions move up the rod. Confirm the rod thread and diameter the hanger accepts, then how the rod itself connects to the structure — beam clamp, cast-in insert, drop-in anchor or channel. That top connection is where most suspended pipework trouble starts, not at the pipe.

Swing, and how to stop it

A single rod is effectively a pin joint. A line hung on individual rods can move sideways, and on a light one-inch run it will do so from a slammed door, a pump start or the first person who leans on it. Where lateral movement matters — near equipment connections, above finished ceilings, or where a project calls for seismic restraint — add bracing or carry the line on a trapeze rather than relying on the hanger alone.

Details worth confirming

Finish and the grade, particularly where the void above a wet area stays humid.
Whether nuts, washers and any lining are supplied with the hanger or ordered separately.
On a chilled line, an insulation insert and load-spreading shield at each hanger, so the metal sits outside the vapour barrier and does not sweat over the ceiling below.

Compare the rest of the range in Stainless Steel Pipe Clamps, Supports & Accessories, Stainless Steel Pipes & Fittings. Related reading: Pipe Supports and Hangers: The Detail That Decides Longevity.

Frequently asked questions

What rod size does this hanger take?

The rod thread it accepts is confirmed at quotation, and it is the first thing to settle because it determines the rod, the nuts and the top connection you order with it. Tell us the drop length, the filled weight per hanger and how you intend to fix into the soffit, and the compatible rod and fixing arrangement can be quoted as a set rather than assembled from odd parts on site.

How should the rod be fixed to the soffit?

By a method suited to the structure above. Cast-in inserts are best where the slab is not yet poured; drop-in or expansion anchors suit solid concrete subject to edge distance and depth; beam clamps suit exposed steel; channel is used where several drops share a route. Avoid fixing into permanent metal deck or a non-structural soffit, and have the top fixing confirmed with the structural engineer.

The suspended line swings. Is that normal?

It is normal for a run hung on single rods, because each rod is a pin joint that offers almost no lateral restraint. Whether it is acceptable depends on what the movement can reach: a swinging line near an equipment connection, above a finished ceiling, or where seismic restraint is specified needs bracing. A trapeze arrangement, or diagonal bracing back to the structure, is the usual fix.

What do I add for a chilled water line at this size?

An insulation insert with a load-spreading shield at each hanger, sized so the hanger closes outside the vapour barrier. Without it, every support becomes a cold bridge that condenses moisture and drips onto the ceiling below, and the metal corrodes at the wet point. Send the insulation type and thickness with the enquiry so the bore and shield arrangement match the specified build-up.